ilding Materials Such as PartDevelopment of a Method for Obtaining Buition Plates Based on Quarry and Industrial Waste and Determining Their Composition
DOI:
https://doi.org/10.54338/18294200-2024.1-09Keywords:
cement dust, tuff, liquid glass, waste, strengthAbstract
A method has been developed to obtain building materials such as partition slabs for the purpose of utilization of quarry and industrial waste. The best quarry waste with a high content of SiO2 is tuff from the Artik deposit. As a binding agent and plasticizer derived from industrial waste was used cement dust from electrostatic precipitators. In addition, two-module liquid glass was used as a binder. Sodium fluorosilicate was used as a hardener. The composition of the mixture used to fabricate the partition slabs has been determined. The compressive strength of the product after 14 days of hardening was 17,1 MPa, water absorption – 13 %, density −1,83 g/cm3.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Эдита Назарян , Александр Аракелян, Николай Князян, Эллада Агамян, Асмик Акопян, Аннета Арустамян
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.